Description
Standard delivery Universal oven dishwasher
The Memmert heating oven dishwasher UFP800DW is specially adapted to the EN50242 standard and complies with the standard’s specifications.
Temperature
| Working temperature range | at least 10 above ambient temperature to +250°C |
|---|---|
| resolution of display for actual values | 0.1°C |
| resolution of display for setpoint values | 0.1°C up to 99.9°C, 0.5°C from 100°C |
| resolution of display/setting accuracy | 0.5°C up to 99.9°C, 1°C from 100°C |
| Temperature sensor | 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error |
Control of standard components
| Controller | digital display of all set parameters, such as temperature, weekdays, time, fan speed, air flap position, programme status and set-up values |
|---|---|
| Timer | digital 7-day programme timer with real time clock, precise minute setting, for one set value or start of ramp operation |
Control technology
| Controller | Electronic microprocessor temperature controller with auto-diagnostic system |
|---|
Ventilation
| Fan | forced air circulation by 2 quiet air turbines, adjustable in 10 % steps for each segment individually |
|---|---|
| Fresh air admixture | adjustment of pre-heated fresh air admixture by air flap control in 10 % steps for each segment individually |
| Vent | vent connection with restrictor flap |
Communication
| Interface Printer | parallel printer interface (incl. real time clock with date function) for all PCL3-compatible ink jet printers for GLP-conforming documentation |
|---|---|
| Documentation | integrated ring memory as data logger for GLP-conforming long-term documentation of all relevant parameters – 1024 kB |
| Documentation | programme stored in case of power failure |
| Programming | multifunctional programming via menu on 8-digit alphanumeric digital display (language to be chosen via set-up): – tempering profiles of up to 40 ramps – time- and set-point dependent operation – air flap adjustable in 10 % steps |
Safety
| Temperature control | independently working, digitally adjustable electronic micro-processor overtemperature monitor TWW, protection class 3.1 (max-value for overtemperature, min-value for undertemperature) |
|---|---|
| Temperature control | mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature |
| AutoSAFETY | additionally integrated over- and undertemperature protection “ASF”, automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature |
| Autodiagnostic system | for fault analysis |
| Alarm | visual and acoustic |
Standard equipment
| Works calibration certificate | for +80°C |
|---|---|
| Door | fully insulated stainless steel door with 2-point locking (compression door lock), lockable |
Stainless steel interior
| Interior | easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides |
|---|---|
| Volume | 749 l |
| Dimensions | w(A) x h(B) x d(C): 1040 x 1200 x 600 mm |
| Max. number of internals | 0 |
| Max. loading of chamber | 300 kg |
| Max. loading per internal | 0 kg |
Textured stainless steel casing
| Dimensions | w(D) x h(E) x d(F): 1190 x 1620 x 750 mm |
|---|---|
| Housing | rear zinc-plated steel |
Electrical data
| Voltage Electrical load | 400 V, 3 phases, 50 Hz approx. 4800 W |
|---|
Packing/shipping data
| Transport information | The appliances must be transported upright |
|---|---|
| Customs tariff number | 8419 8998 |
| Country of origin | Federal Republic of Germany |
| WEEE-Reg.-No. | DE 66812464 |
| Dimensions approx incl. carton | w x h x d: 1330 x 1910 x 1050 mm |
| Net weight | approx. 185 kg |
| Gross weight carton | approx. 256 kg |
