Chamber Kilns for Arts & Crafts

บริษัท บางกอกไฮแล็ป จำกัด ได้เป็นตัวแทนจำหน่ายเตาจากบริษัท Nabertherm ซึ่งเป็นลริษัทผู้ผลิตเตาเผารายใหญ่ของประเทศเยอรมัน โดยเตาเผาที่นำเข้ามาขายจะมีมากมายหลายประเภทแตกต่างกันไปตามการใช้งาน

ติดต่อขอรับฟังรายละเอียดสินค้าเพิ่มเติมได้ที่หมายเลขโทรศัพท์ 02-9715800 หรือ 08-6332-7470, 08-1823-4027


Chamber Kilns with Drawer Bottom or as a Bogie


The chamber kiln of NW model series combines the attractive quality advantages of the proven models N 150 – N 1000/H with an outstanding product characteristic which substantially simplifies charging.

With a drawer mechanism (NW 150 – NW 300/H) the kiln table can be easily pulled out. The larger models NW 440 – NW 1000/H are designed as shuttle kiln with completely free traversing bogie. Free access in front of the kiln allows for a simplified and clear charging the kiln.

  • Dual shell housing
  • Front made of textured stainless steel
  • Environment-friendly, long-life powder-coating of housing
  • Rugged, self-supporting, vaulted arch construction
  • Controller mounted on kiln door and removable for comfortable operation
  • Multi-layer insulation with light-weight refractory bricks and high-quality, energy-saving backing insulation
  • Lightweight refractory bricks inside kiln chamber for clean firing results
  • Dual shell door with long-live sealing
  • Kiln table can be easily pulled-out (NW 150 – NW 300/H)
  • From model NW 440 bogie on four castors (two with brakes) which can be pulled out completely. Accession assistance and removable drawbar for bogie
  • Door sealing grinded by hand (brick on brick); NW 150 – NW 300/H
  • Door is adjustable
  • Door safety switch shuts down power to the elements when the door is opened
  • Heating from five sides with special arrangement of heating elements for optimum temperature uniformity
  • Heating elements of support tubes provide for free radiation of the heat
  • Solid state relays provide for low-noise operation
  • Rapid switching cycles result in precise temperature control
  • Type S thermocouple
  • Air inlet flap with integrated residual drying function closes the air inlet at a temperature which can be set in the controller for NW 150 – NW 300/H
  • Exhaust air outlet in the ceiling, manual exhaust air flap for models NW 440 – NW 1000/H
  • Delivery incl. pipe connection for connecting an air outlet with 80 mm diameter for NW 150 – NW 300/H
  • SiC-floor plate protects floor elements and provides a level setting surface
  • Base included in delivery (NW 150 – NW 300/H). Fixed base for larger models.
  • Comfortable charging height with base of 800 mm (NW 440 – NW 1000/H = 500 mm)
  • Defined application within the constraints of the operating instructions